Analog Devices ADM2587EBRWZ: The "All-Rounder" for Industrial Communication Isolation

In high-reliability systems such as industrial automation, energy monitoring, and medical equipment, signal isolation and anti-interference capabilities are core requirements for ensuring stable equipment operation. Analog Devices' (ADI) ADM2587EBRWZ integrated isolated RS-485/RS-422 transceiver stands out as a benchmark in industrial communication, thanks to its dual isolation design (signal + power), high ESD protection, and flexible protocol support.

1. Core Features: Balancing Isolation and Performance
The ADM2587EBRWZ comes in a 20-pin wide-body SOIC package, integrating a digital isolator with a 2500Vrms isolation voltage and a DC-DC power module for complete electrical isolation between the logic and bus sides. Key specifications are summarized in the table below:

Parameter	Specification
Isolation Voltage	2500Vrms (compliant with IEC 61010-1)
Data Rate	Up to 500kbps
ESD Protection	±15kV (IEC 61000-4-2 standard)
Operating Voltage	Single 3.3V/5V power supply
Channel Count	2 channels (unidirectional isolation)
Protocol Support	RS-485 (half/full-duplex), RS-422

Technical Highlights:

Integrated Isolated Power: Built-in DC-DC converter eliminates the need for external isolated power modules, significantly reducing PCB space and cost.
Anti-Interference Capability: The 2500Vrms isolation voltage withstands voltage surges common in industrial environments, while ±15kV ESD protection ensures stable operation in harsh conditions.
Protocol Compatibility: Supports RS-485 half-duplex and full-duplex modes, compatible with mainstream industrial protocols like Modbus RTU and Profibus DP.
2. Typical Application Scenarios
1. Factory Automation: PLC Communication Modules
In PLC-to-sensor/actuator communication, the ADM2587EBRWZ enables long-distance data transmission (e.g., up to 1200m under Profibus DP) while suppressing common-mode noise. Its isolation design prevents ground loop interference, ensuring signal integrity. For example, in automotive manufacturing lines, the chip connects multiple temperature sensors for real-time monitoring of welding process temperatures.

2. Energy Monitoring: Smart Meter Deployment
Smart meters require stable operation in lightning-prone areas. The ADM2587EBRWZ's high isolation voltage and surge suppression protect the meter's core circuitry from damage. Its low power consumption (typical operating current: 10mA) also meets stringent energy efficiency requirements for smart meters.

3. Medical Equipment: Interface Isolation
In patient monitoring systems, the ADM2587EBRWZ isolates patient-side signals from the host circuitry to prevent leakage current risks, complying with IEC 60601-1 medical safety standards.

3. Frequently Asked Questions (Q&A)
Q1: What is the load capacity of the ADM2587EBRWZ's isolated power supply? Can it drive multiple loads?
A: The built-in isolated DC-DC converter has limited output power (typically ~100mW). Designers must ensure the bus-side load current does not exceed its capacity. For multi-channel isolation (e.g., 16×2 channels), an external dedicated isolated power module (e.g., ADuM5000 series) or distributed power supply is recommended.

Q2: Why does the ADM2587EBRWZ work correctly even when RS-485 signal lines are reversed?
A: This is due to its differential signal processing mechanism. The RS-485 protocol inherently uses A/B line differential transmission for noise immunity, and the ADM2587EBRWZ's receiver automatically detects signal polarity. Even if A/B lines are reversed, the USART_RX output on the logic side correctly decodes data. However, proper termination resistors (120Ω) must be installed to avoid signal reflections.

Q3: How to optimize PCB layout for the ADM2587EBRWZ?
A: Key principles include:

Strictly separate logic and bus sides, maintaining adequate creeage distance (≥2mm recommended).
Avoid routing high-speed signals near the isolation barrier to prevent coupling interference.
Place termination resistors close to the last two nodes on the bus side.
4. Conclusion: The "Safety Guardian" for Industrial Communication
The ADM2587EBRWZ provides a high-reliability, cost-effective solution for industrial communication through integrated isolated power, high ESD protection, and flexible protocol support. Whether in factory automation, energy monitoring, or medical equipment, its "plug-and-play" design significantly shortens development cycles, making it a top choice for engineers designing isolated interfaces.

Fudong Communication (Shenzhen) Group Co., Ltd., established in 2004, is a specialized global first tier semiconductor agent/distributor.

Fudong Mall is an online e-commerce platform belonging to Fudong Communication (Shenzhen) Group Co., Ltd. Fudong collaborates with global electronic component distributors and Chinese spot inventory suppliers.