Hello! now About Us
+86 075582561136
Upload BOM
An In-Depth Look at Texas Instruments TLV9061IDBVR
8/17/2026 2:56:36 AM
In the daily work of electronic engineers, component selection is always a trade-off among performance, cost, and board space. The TLV9061IDBVR, a single-channel CMOS operational amplifier from Texas Instruments (TI), is specifically designed to resolve this dilemma. With its excellent cost-performance ratio, it plays a critical role in consumer electronics, industrial control, and battery-powered devices.
Core Specifications: Small Size, Big Capability
The TLV9061IDBVR comes in a compact SOT-23-5 package. Its key performance parameters are summarized in the table below:
|
Parameter |
Typical Value |
|
Supply Voltage |
1.8V to 5.5V |
|
Gain Bandwidth Product (GBP) |
10 MHz |
|
Slew Rate (SR) |
6.5 V/µs |
|
Input Offset Voltage (Vos) |
±0.3 mV (typical) |
|
Quiescent Current (Iq) |
538 µA |
|
Rail-to-Rail Input/Output |
Supported |
|
Operating Temperature Range |
-40°C to +125°C |
Three Key Features
1. Rail-to-Rail Input/Output (RRIO): This is one of the most prominent advantages of the TLV9061IDBVR. Under single-supply operation (e.g., 3.3V), it can process signals close to both supply rails (0V and 3.3V), maximizing the ADC input range. It is especially suitable for sensor signal conditioning.
2. 10MHz Bandwidth and Low Noise: The 10MHz gain-bandwidth product enables it to handle intermediate-frequency signal amplification tasks such as audio processing and active filtering. In addition, its low noise density of 10nV/√Hz ensures signal chain purity, which is critical for precision measurements.
3. Excellent Balance Between Power and Packaging: With a quiescent current of only 538µA, this device stands out among 10MHz op amps, making it ideal for portable devices. It also offers a variety of package options, from the ultra-compact X2SON to the standard SOT-23, giving engineers flexibility to match PCB space constraints.
Typical Applications
Thanks to the above characteristics, the TLV9061IDBVR finds widespread use in:
Portable and Battery-Powered Devices: Its ultra‑low power consumption is key to extending battery life.
Sensor Signal Conditioning: Its low input bias current (0.5pA) makes it an excellent choice for amplifying signals from high‑impedance sensors such as photodiodes.
Audio and Industrial Control: It can be used in audio preamplifiers, low‑side current sensing, motor control, and more.
Frequently Asked Questions (Q&A)
Q1: What is the difference between TLV9061IDBVR and TLV9061IDBVR‑MS?
A: The main parameters are identical. The "‑MS" suffix typically indicates a product from MSKSEMI, while the standard part number is from TI original. When purchasing, be sure to distinguish the brand and supply channel.
Q2: Can it operate with a dual power supply?
A: Yes. It supports a single supply from 1.8V to 5.5V, as well as dual supplies from ±0.9V to ±2.75V.
Q3: What should I watch out for when driving capacitive loads?
A: Its resistive open‑loop output impedance makes it easier to drive high capacitive loads. However, it is recommended to refer to the datasheet for compensation guidelines to ensure stability.
In summary, the TLV9061IDBVR is a general‑purpose operational amplifier that achieves an excellent balance between performance, power consumption, and cost. Whether used in cost‑sensitive high‑volume products or high‑precision instruments, it remains a trustworthy choice.
Fudong Communication (Shenzhen) Group Co., Ltd., established in 2004, is a specialized global first tier semiconductor agent/distributor.
Fudong Mall is an online e-commerce platform belonging to Fudong Communication (Shenzhen) Group Co., Ltd. Fudong collaborates with global electronic component distributors and Chinese spot inventory suppliers.
Blog Category
BlogsTags
Related Information
2026-10-08
- 1500+ Daily average RFQ Volume
- 20,000.000 Standard Product Unit
- 1800+ Worldwide Manufacturers
- 15,000+ In-stock Warehouse
